2003 CAT 143H VHP PLUS for sale in North Platte, NE

Caterpillar 143H AWD Motor Grader equipped with base function hydraulics plus ripper and plow valves, circle slip clutch, Caterpillar lift group, Caterpillar ripper, and external heated mirrors. The enclosed cab contains heat, A/C, and air suspension seat.| Motor Graders All Photos Videos SMU/Hrs 14990 hrs. Transmission Serial # BSD00708 Engine Serial # 3PD03829 | Motor Graders Configuration CE Plate No Slipclutch Yes Product Link No Lift Group Yes Anti-Theft System No All Wheel Drive Yes Accumulators No Ultra Low Sulphur Fuel Only No Diff Lock/Unlock Yes Ripper Yes Scarifier, Front No Variable Horsepower Yes Tip Control Yes Snow Wing No Snow Plow No Side Shift Yes Pushblock No Cab, Low Profile Yes Cab, High Profile No Air Conditioner Yes OROPS No EROPS Yes | General Appearance Cleaning Required Yes   Comments: Dirt. S.O.S. Taken No   Comments: No samples were taken at this time. Sheet Metal Good Paint Good   Comments: Normal wear for the age and hours of the machine. Grab Irons Good Steps / Ladder Good Cab or Canopy Good Pre-Cleaner Bowl Good Couterweight Not Applicable Bumper Not Applicable Rear Frame Good Front Frame Good Draw Bar Good Crankcase Guard / Battery Box Good Fuel Tank Good Eng. Enclose Hood / Stack Good Radiator Grill & Shroud Good | Safety Items All Photos Videos Horn Good ROPS Yes   Comments: ROPS certificate, ISO:3471-1994. FOPS certificate, ISO;3449-1992 Level II. Signal Lights Yes Rotating Beacon Yes | Gauges / Operator Station / Console All Photos Videos Back Up Alarm Yes Seat Belt Yes   Comments: The seat belt is in decent condition but has past its 5 year OSHA usability date. The seat belt was manufactured in Jan. 2003. Current O&MM Yes Current Safety Manual Yes Air Conditioner Good   Comments: The ambient air temperture was to cold to test the system, but the compresser would engage when actuated. Glass / Mirrors Fair   Comments: The upper front windshield is cracked. Door Latches Good EMS Panel / Warnings Good Seat Cushion / Arm Rest Good Heater Good Switches Good Gauges Good Dash Console Good | Engine All Photos Videos Notes   Comments: The return fuel line off of the secondary fuel filter base is leaking. Belts / Pulleys Good Exhaust / Muffler Good Air Cleaners Fair   Comments: Normal use. Smoke (B/D/L/W) Normal Oil Pressure (H/L/N) Normal Anti-Freeze Color Red, ELC Fluid Levels OK? No   Comments: The coolant level is extremely low. Water in Oil No Knocking No Blow By No Oil Leaks No | Cooling System All Photos Videos Leaks Yes   Comments: The hose connections and possible mounting gaskets are leaking coolant on the engine oil cooler. Hoses Good Radiator Good | Electrical / Starting and Charging System Block Heater Yes Ether Aid Yes Lighting Fair   Comments: The tail lights are inoperative. Wiring Good Alternator Good Starter Good Batteries / Cables Good | Transmission All Photos Videos Notes   Comments: The transmission ECM has logged a couple of faults for the #1 output shaft speed sensor. Leaks Yes   Comments: The transmission sump suction hose is brittle and leaking. The upper countershaft manifold cover O-ring seal is leaking. Transmission - Noisy No Transmission - Forward Shifts Good   Comments: 8 sppeds forward. Transmission - Reverse Shifts Good   Comments: 6 speeds reverse. Lines / Fittings Good Universal Joints Good Torque Converter Not Applicable Seals Good Controls Good Case Good Transmission - Type Good   Comments: 8 speed countershaft powershift with auto-shift. | Steering Supplemental Steer Not Applicable Wheel Lean Cylinder Good Oil Lines Good Steering Cylinder Good Tie Rods / Rod Ends Good Steering Linkage Good | Brakes Leaks No Parking Brake Good Accumulators Not Applicable Lines Good | Tandems Differential Good Wheel Lugs & Rims Good Tandems Good | Hydraulics Leaks No Drive Line Good Ripper/Scar. Lift Cylinder Good Circle Side Shift Cylinder Good Circle, Shoes & Plates Fair   Comments: The circle drive pinion has some noticeable wear present. Wheel Lean Cylinder Good Tip Cylinder Good Life Cylinder Good Side Shift Cylinder Good Linkage Good Hose Lines Good Pumps & Valves Good Tank Good Operating Condition Good | Blade All Photos Videos Blade Size 14' moldboard + 2' LH extension Circle Yes   Comments: The front quarter of the circle segments have some minor wear present. Cutting Edge Condition Yes   Comments: The machine is currently equipped with carbide cutting edges that have some chips and minor breaks present. Face / Moldboard Yes | Ripper All Photos Videos Lines / Fittings Good Shanks / GET Good   Comments: The operator suggested that here might be a full set of 5 ripper shanks and 9 scarifer shanks that go with the machine which are in like new condition. It is not certain that these will go with the machine though. Beam / Frame Good Pins & Bushings Good | Tires All Photos Videos Spare NA Tire Size 17.5-25 Left-Rear - Side Cuts Section No Left-Rear - Tread Cuts/Chunks No Left-Rear - Recapped No Left-Rear - % Life Remaining 50% Left-Rear - Tread Depth in 1/32in 16/32" Left-Rear - Make/Serial# Michelin XTLA. s/n:YT01074M5A Left-Rear-Center - Side Cuts Section No Left-Rear-Center - Tread Cuts/Chunks No Left-Rear-Center - Recapped No Left-Rear-Center - % Life Remaining 72% Left-Rear-Center - Tread Depth in 1/32in 23/32" Left-Rear-Center - Make/Serial# Double Coin REM2. s/n:G32251194 Left-Front - Side Cuts Section No Left-Front - Tread Cuts/Chunks No Left-Front - Recapped No Left-Front - % Life Remaining 50% Left-Front - Tread Depth in 1/32in 16/32" Left-Front - Make/Serial# Michelin XTLA. s/n:FTH0036M3A Right-Rear - Side Cuts Section No Right-Rear - Tread Cuts/Chunks No Right-Rear - Recapped No Right-Rear - % Life Remaining 53% Right-Rear - Tread Depth in 1/32in 17/32" Right-Rear - Make/Serial# Michelin XTLA. s/n:VTM0732F0A Right-Rear-Center - Side Cuts Section No Right-Rear-Center - Tread Cuts/Chunks No Right-Rear-Center - Recapped No Right-Rear-Center - % Life Remaining 72% Right-Rear-Center- Tread Depth in 1/32in 23/32" Right-Rear-Center- Make/Serial# Double Coin REM2. s/n:G32251778 Right-Front - Side Cuts Section Yes Right-Front - Tread Cuts/Chunks No Right-Front - Recapped No Right-Front - % Life Remaining 41% Right-Front - Tread Depth in 1/32in 13/32" Right-Front - Make/Serial# Michelin XTLA. s/n:CVA4171V2A


Demag AC160-2 -

Demag AC160-2 -

Syracuse, NY
Posted on: October 19
Additional Information Main boom 210' with quick disconnect system, 30'-56' swing-away jib, - Main boom 210' with quick disconnect system - 30'-56' swing-away jib - 52' main boom extension (2x26') - 5 axle crane carrier - Drive & Steer 10x8x8 - 5 sheave block - 1 sheave block - quick disconnect for outriggers - CWT 119,500LB - dolly preparation - air conditioning - rooster sheave + 2nd boom head ...

Demag AC200-1 -

Demag AC200-1 -

Syracuse, NY
Posted on: October 19
Additional Information COMING SOON!! Worldwide Engine, 41'-223' Boom, 30'-56' Jib, Single Line Hook, 3 blocks - Worldwide Engine - 41'-223' Boom - 30'-56' Jib - Single Line Hook - 3 blocks - Telescopic boom HA: 41-223' (12,5m- 67,8m) - rooster sheave - HAV17: Double folding swing-away jib 30'-56' (9m/17m) manual offset 20 degree/40 degree 1-sheaved head, Incl. transport storage - VA16: 8m/16m...

Demag AC250-1 -

Demag AC250-1 -

Syracuse, NY
Posted on: October 19
Additional Information 48'-262' Main Boom, 32'-65' Hydraulic offsettable Jib, 26'-52' Telescopic boom extension, - 48'-262' Main Boom - 32'-65' Hydraulic offsettable Jib - 26'-52' Telescopic boom extension - 213,000 lbs of counterweight -125ton-5 sheave hook block - 80 ton- 3 sheave hook block - single line hook - Dolly Preparation, with automatic rigging system - Innovative Demag IC-1 crane con...

Demag AC350-6 -

Demag AC350-6 -

Syracuse, NY
Posted on: October 19
Additional Information 210' 6 section Main Boom, Drive/Steering 12 x 8 x 10, automated rear axle steering system. CRANE CARRIER: - 210' 6 section Main Boom - Drive/Steering 12 x 8 x 10 - automated rear axle steering system - 4 telescopic outriggers with automatic leveling - Automatic centralized lubrication - 8 cylinder DaimlerChrysler OM 502 LA - 612 HP Tier 3 diesel engine - ZF AS-Tronic incl...

Demag AC40-1 -

Demag AC40-1 -

Syracuse, NY
Posted on: October 19
Additional Information 3-axle CITY CRANE, Drive & Steer 6x4x6, Main boom 102' - 3-axle CITY CRANE - Drive & Steer 6x4x6 - Main boom 102' - Boom head traverse cpl.: Searcher hook, incl.shackle and hook - HAV13: 7,1/ 13,0m, Double folding swing-away jib, manual offset 30°, 1-sheaved head, Incl. transport storage, Includes HAV7 - Counterweight rigging device - Cast counterweight 3-pieces - Hook bl...

Don't Be a Victim of Fraud

  • Electronic Scams
  • Home-based jobs
  • Fake Rentals
  • Bad Buyers
  • Non-Existent Merchandise
  • Secondhand Items
  • More...

Don't Be Fooled

  • When selling, do not put your home address in your ad.
  • To avoid scams, buy and sell with people you can meet locally, in person.
  • When meeting with someone you don't know, meet in a public place. If that's not possible, have a buddy with you. Also, carry a cell phone; if you feel unsafe, you can call a trusted friend, and stay on the line.
  • Never give out financial or private information like account numbers, PayPal login, or social security number.
  • If an offer sounds too good to be true, it is. Walk away!